This kit includes: Bantam Bully Needle Scaler Pistol Grip, Handle Kit Box, Peening Tool, Gouge, Routing & Grooving Chisel, Set of Needles, Chisel Adapter Set
Includes Model 95510 Bantam Bully Pistol Grip Needle Scaler No. 400 Kit Box No. 10600 Peening Tool No. 11600 Gouge No. 12600 Routing & Grooving Chisel No. 250027 Set of Needles No. 95525 Chisel Adapter Kit Our lightest weight needle scalers are only 2-1/2 lbs, but delivers big and outperforms needle scalers three times its size and four times its weight. Only 9 needles make it easy to get into tight places fast with the needles moving up to 13,000 times per minute. No need to have rectangular nose, as needles will conform to rectangular work.
This kit includes:
Bantam Bully Needle Scaler Pistol Grip Handle
Kit Box
Peening Tool
Gouge
Routing & Grooving Chisel
Set of Needles
Chisel Adapter Set
The Bantum Bully® Needle Scaler cuts even large jobs down to size. Removing weld flux and splatter with a Bantam Bully Needle Scaler is easy! First, choose a needle scaler that will not damage the weld or your project when removing weld flux and splatter/slag after welding. Our Bantam Bully 95510 (PG) and 95511 (STR) have 13,000 BPM, making it our fastest and lightest hitting scalers. These Bantam Bully needle scalers are ideal for removal of flux and splatter without damage to the weld or product, see attached video. Second, lubrication of needle scaler, protective equipment and safety practices should always be followed when using power tools. After making your weld, hold the needle scaler at an angle to the weld. The Bantam Bully needle scaler should be held just off the work; this allows the needles to reciprocate over the weld. The needles will conform to the different contours of the weld to clean off the flux and splatter/slag. Next, move the Bantam Bully needle scaler along the weld for removal of flux and splatter. This will produce a nice clean surface to either give ease of weld inspection or a surface to finish additional prep work on your project. Many welders choose to use a standard chisel to remove flux and splatter instead of a needle scaler.
